hackintosh nvidia high sierra clover configurator

#Hackintosh nvidia high sierra clover configurator install#
#Hackintosh nvidia high sierra clover configurator update#
#Hackintosh nvidia high sierra clover configurator full#
#Hackintosh nvidia high sierra clover configurator pro#
#Hackintosh nvidia high sierra clover configurator password#

On the clover devices page ensure intelGFX Fake ID is set to 0x0000. Add ig-platform-id of 0x3e9b0000 and tick the Inject Intel box. Load Clover configurator, mount the OSX drive EFI again and load the ist from EFI/CLOVER.

#Hackintosh nvidia high sierra clover configurator update#

If after the latest security update you lose USB3 type this line into the clover BOOT flags section in clover configurator to exclude all the unused USB port allocations (assuming all Alienware 17R5s boot up with the same allocations) uia-exclude=HS03 HS05 HS06 HS08 HS10 HS11 HS12 HS13 SS01 SS02 SS03 SS04 SS05 SS08 SS09 SS10 you can also disable the port limit patch after doing this.

#Hackintosh nvidia high sierra clover configurator password#

To prevent missing mouse after screen wake set screensaver to come on before screen sleep (and make sure system sleep is off and password required when screen resumes). Tick HWP in the Clover configurator CPU tab.

#Hackintosh nvidia high sierra clover configurator pro#

System info should now be reporting as a MacBook Pro (2018) although the processor identifies as an I7.

If you want to set smbios to MacBook Pro 15.1 (a good hardware match) you have to also set a custom boot flag in clover configurator boot page of -no_combat_checkĭo another round of Apple updates and then remove -no_compat_check.

#Hackintosh nvidia high sierra clover configurator full#

You should now be able to boot with full graphics acceleration.Ĭopy the following kexts to OSX drive EFI/CLOVER?KEXTS/OTHER (mount with clover configurator), VoodooHDA.kext (sound), ACPIBatteryManager.kext (battery indicator), USBInjectAll.kext (USB - apply the correct port limit patch for High Sierra 10.13.6 in Clover configurator Kernal and Kext Patches section), HibernbationFixUp.kext (not sure this fixes anything though)

#Hackintosh nvidia high sierra clover configurator install#

From the Kext installer install LILU, FakeSMC, and whatevergreen to /Kexts/Others.ĭownload Nvidia web drivers and install, before rebooting use clover configurator to open the OSX drive PLIST and in SMBIOS set to iMac 14.2, in system parameters tick nvidiaWeb, in Boot tick NVDA_DRV=1 and untick NV_Disable=1. Leave anything else as it currently is.Īt this point you should be able to reboot using the new boot option (power on laptop and press F12) without the USB drive.Īfter reboot load Clover configurator, mount the OSX drive EFI again then load the ist from EFI/CLOVER. In clover configurator load the ist from EFI/CLOVER and on the Install Drivers page uninstall OSXAptioFix1,2 and 3. Mount the EFI on the OSX drive and copy the whole EFI folder from the desktop to the EFI overwriting if necessary. Run the clover installer select the customise option and have the following selected, clover for UEFI booting only, Install clover in the ESP, themes, Install RC scripts on target volume, install clover preference pane. Unmount the USB drives EFI folder using clover configurator Mount the USB drives EFI using clover and copy the EFI folder from it to the desktop. Once OSX is loaded copy clover configurator and clover installer back to the OSX desktop from the USB drive. If the install aborts or Alienware restarts, boot from the USB drive and keep select the installer from the hard drive not the USB, keep doing this up to 3 times to get to the MAC setup screens. Select Install OSX from USB and when the installer asks select the drive you formatted on the Alienware 17R5 Copy clover configurator and the latest Clover installer to the USB main drive (not in the EFI)Īlienware 17R5 2018 bios set VT for Direct I/O to Disabled, Disable Secure Boot, Set SATA Operation to AHCI (I think I just ignored the warning it gave but then I believe I had to go into windows repair and let it fix windows because of the change (check online), If TPM firmware is enabled disable it.īoot from USB drive and go to Disk utility, format the drive you are going to install OSX on Mac Extended Journaled Use Clover configurator to open the USB EFI and put Rehabmans VOODOOPS2Controller.kext into EFI/CLOVER/KEXTS/OTHER. Use UniBeast version 8.3.1 and the 10.3.6 High Sierra install image to create the USB boot disk. Sound ok, Nvidia graphics full acceleration, dual display with DP tested (full resolution on both displays), factetime, imessage, iCloud Drive all working, Siri works, trackpad tap to click ok, display resolution changeable, the rear USB-C works with USB3 and USB2 devices etc.etc Had to add a USB Wifi since Killer WiFi module is not supported, no panel brightness controls yet and no working computer sleep but everything else is working pretty well.